PCBA for non-contact infrared thermometer

Thermal Printer PCB Board Assembly

Fully automatic Bluetooth voice thermal printer PCB assembly can be connected to wireless Bluetooth WIFI of mobile phone
  • Item NO.:

  • Product Origin:

    Made in China
  • Color:

  • Shipping Port:

    Shenzhen port
  • Lead Time:

    2 weeks
  • Product Detail

Thermal Printer PCB Board Assembly

Item NO.


PCB Layers

2 layers



Thickness of Copper


Size of Board


Thickness of Board


Solder mask color


Surface Treatment







Driver free

Power Supply




Proofing times

2 weeks

The thermal printer PCBA is mainly composed of two parts, one part is the thermal printer head (FPC connector, thermistor, motor and motor drive). Another control board, this control board mainly controls the functions of the printer (overheat detection, paper out detection and STB), data interaction and system control. The MCU on the motherboard uses the N32G020K6 chip, the ARM cortex-M0 processor core, and supports DMA. It can directly read the USB and UART interface data, reducing the access to the interface data through the CPU (usually, the data will pass through the control board first) The MCU is then sent to the print head through the SPI interface), the font store Flash can reach 32K bytes, the BIOS burner chip and buttons, etc.

Advantages of this plan:

1) Fast calculation speed, the highest main frequency can reach 80MHz;

2) Fast reading and writing speed and many times, with 2KB instruction cache, 32K bytes flash memory, about 200,000 erasing and writing times;

3) Rich interfaces, supporting up to 30 GPIOs;

4) Support multi-mode low power consumption, working voltage 1.8V-5.5V, the minimum can be kept below 0.1uA;

5) Security, built-in hardware storage protection and encryption and decryption algorithm acceleration engine;

6) Support wireless printing, with Bluetooth chip;

Fast printing speed, 4-wire SPI, with an independent DMA, improve data processing speed;

Compared with conventional solutions, our thermal printer PCBA can work at full speed even in standby mode, with low power consumption, small size, low maintenance cost, fast printing speed and stable performance, and is suitable for mid-to-high-end markets.

Q: Do you have your own factory?
A: Sure, We have our own PCBA factory. Welcome to visite our factory.

Q: Can you provide design the thermal printer PCBA services?
A: Yes,we can help you to design the thermal printer PCBA depend on your requirements.

Q: How long can I get the thermal printer PCBA quotation?

A:  In general, after you confirm engineer's inquiries3 working days will send it to you.

Leave A Message
If you are interested in electronic products and want to know more details, please leave a message here,we will reply you as soon as we can.
Related Products
Keyboard PCB Assembly
Mechanical Keyboard Circuit Board Assembly
The important mechanical keyboard component is PCB, chip and mechanical switch.The quality of the circuit board and the mechanical switch, which directly leads to the service life and feel of the mechanical keyboard. Each button of the mechanical keyboard component is controlled by a separate switch, and you can change the mechanical axis and LED lamp beads you like at will.
Mouse PCB Assembly Manufacturers
PC Mouse Designed PCB Printed Circuit With PCB Assembly
1.6mm 4-layer Bluetooth wireless dual-mode mouse PCB and PCB assembly with USB receiver Support the charging
Capacitor Microphone Circuit Board Assembly
Bluetooth Microphone Circuit Board Assembly
2 layers PCB LED Wireless Capacitance Microphone Circuit Board Assembly Manufacturers
infrared thermometer PCBA
Infrared Thermometer Circuit Board Assembly Manufacturers
This infrared thermometer PCBA is used to measure the forehead temperature of the human body. It is very simple and convenient to use. (1).Trigger button, one key for 1 second can accurately measure temperature; (2).No laser spot, avoid potential damage to eyes; (3).No need to touch human skin, avoiding cross infection; It is suitable for home users, hotels, libraries, large enterprises and institutions, and can also be used in hospitals, schools, customs, airports and other comprehensive places, and can also be used by medical staff in clinics.
Smartphone Flexible PCB
High Precision Smartphone Rigid Flexible PCB Producer
Smart phones are small in size and generally use rigid PCB and flexible PCB. PCB reduces wiring and assembly errors, saves equipment maintenance, debugging and inspection time, facilitates mechanized and automated production, improves labor productivity and reduces the cost of electronic equipment. The design can be standardized to facilitate interchangeability.
car dashboard PCB assembly manufacturers
China Car Dashboard PCB Assembly Suppliers
In the electronic control function of the car dashboard printed circuit board assembly, the main control circuit adopts the single-chip microprocessor as the control unit. After the signal input circuit inputs the collected signal to the microprocessor, it is processed by the software in the microprocessor and then output to the microcomputer. The LCD drive circuit of the processor output port and the meter head motor drive circuit. The advantage of this is that it adopts a unified stepping motor structure, which is centrally controlled by MCU, with high working accuracy, strong function and versatility, high reliability, and effective cost reduction. In addition, it also makes the alarm function more intelligent. When the speed value exceeds the set limit value, the LED indicator light will light up to automatically remind the driver to perform the corresponding operation, which better guarantees the safety during driving.
Oximeter Circuit Board
Digital Display Oximeter Circuit Board Assembly
Digital Display Oximeter Circuit Board Assembly Fingertip oximeter mainly measures pulse rate, oxygen saturation, perfusion index (PI), which is used to measure oxygen content in the body. The product is small in size, easy to carry and easy to operate. It is mainly composed of a microprocessor, memory (EPROM and RAM), two control LED digital-to-analog converters. A probe usually contains two luminous LED, Contact fingers through LED infrared. Brightness through the skin and musculoskeletal tissue of the fingers, Accurate detection of blood oxygen saturation and pulse, And so both LED are driven by pulse signals, Using digital processing, PIN the transistor is activated by LED light source to OA0 the output signal and amplify the OA1 operational amplifier, TS951 sample two operational amplifiers. Display the measurements on the LCD, (RAM) Memory (Easy to store operating procedures, and data search, with 12-bit resolution to quantify the data received by the photodiode, using a high-performance acceleration sensor ,8 seconds to produce results, two-color OLED display, one button can switch screen direction, with ultra-low energy consumption, clear display. Name Pulse Oximeter PCBA Board material FR4 Display Format OLED Display Pulse Rate Mearuring Range 30bpm-240bqm Measure accuracy :±2BPM or ± 2%  of the measured value(take larger value). Pulse Wave Display columination display and the waveform display Power Consumption <30mA. Resolution 1% for SpO₂ and 1 bpm for Pulse Rate FAQ: Q: How can I get the oximeter PCBA price? A: As long as you can offer Gerber file and BOM list, we can offer price within 24 hours. Q: Are you trading company or manufacturer ? A: We are PCB factory with 10 years experience in this area,We have self desinging team and sales team, we have both auto pcb production line and traditional line available in our factory. Q: What is the oximeter PCBA minimum order quantity? A: For mass production, our min order 500pcs. If less than this, it will be considered as a sample order.
Bluetooth Printed Circuit Board
Smart Earphone Flexible PCB Manufacturers
The antenna is an important part of the Bluetooth earphone PCB. The PCB has through and metalized vias, and the walls of the vias form a conductive layer; the antenna conductor is etched on the upper antenna conductor of the copper foil on the top of the PCB and under the copper foil on the bottom of the PCB The antenna conductor, the antenna's radiation intensity and radiation efficiency are in the optimal state, which can effectively realize the reliability and stability of the Bluetooth headset product.
Subscribe for our newsletter

Please read on, stay posted, subscribe, and we welcome you to tell us what you think.

click here to leave a message

Leave A Message
If you are interested in electronic products and want to know more details, please leave a message here,we will reply you as soon as we can.